CANON PIXAM IP110 INK INSTALL

The printer has a built-in ink absorber to hold the ink used when print head cleaning.Įight flashes indicates that the ink absorber is nearly full. Or if you still need help, visit our Canon Community by clicking the button below to get answers: If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options. If the print head is already installed, remove it once and then reinstall it.

CANON PIXAM IP110 INK INSTALL

The printer may be damaged if printing continues with low ink levels.įollow the directions given in your setup sheet to install the print head. Replacement of the ink tank is recommended. If a print job is in progress and you want to continue, tap RESUME/CANCEL with the ink tank installed. It is recommended to replace the ink tank. If the lamp on the ink tank flashes, ink may have run out. Push the ink tank until it clicks into place. If the lamp on the ink tank isn't lit, the ink tank may not be installed properly. Push the left (1) and right (2) tab until each one clicks into place. The lock lever of the print head isn't locked properly (there are two tabs of the lock lever).

The print head lock lever is not locked properly. Remove the jammed paper, reload paper properly in the printer, and then tap RESUME/CANCEL

Reload paper in the rear tray and tap RESUME/CANCEL. Count the flashes and take the appropriate action to correct the error. The number of flashes indicates the type of error that has occurred. When a printer error occurs, the Alarm lamp flashes orange as shown below.

Canon pixam ip110 ink